This product is produced with excellent formulation using special
cement ,fine aggregate and spray-dried dispersible polymer powder
and special additives. It is an ideal self-leveling material with
high fluidity and plasticity, which provide a flat, perfect and
solid base for laying all types of resilient flooring, carpet,
wooden floor and flooring material.ect. it is nontoxic,
nonhazardous and belongs to environment friendly products and
widely apply to the residence,office and small business buildings
such as the place of low compressive strength.
Features of performance:
1. High fluidity, is capacity to extend service life and decorative
effect of various floor covering
2. Easy to apply, quick setting, various floor-covering materials
can be applied after short time.
3. High compressive and the tensile strength and alkali resistance.
4. Economical and practical
Technical Specification(23℃,humidity 50-55%)
|Working Time||About 20min|
|Compressive Strength||(MPa)≥20(after 28days)|
|Split Strength||(MPa)≥4.0(after 28days)|
|Quality Guarantee Period||6months|
|Theoretical application rate||6-7㎡/25KG|
|the mixing ratio||25kg cement : 6.5kg water|
|Packaging Details:||25kg laminated paper bag|
The surface should be clean, dry and strong without loose part. The
substrate should be cleaned thoroughly. Before application of the
compound the substrate should be applied by proper primer. When the
primer is absorbed and the substrate is in a half-dry state, Start
self leveling construction .
First, mix the product with water in the mixing ratio of
self-leveling cement: water=25:6.5kg. The mixing method is: pour
clean water into a suitable container, then add self-leveling
cement while stirring vigorously until uniform viscous mixture is
Pour the mixture on the area to be applied, spread the material
uniformly to required thickness using toothed rake (range of
thickness is 1-4mm).The mixture must be finished in 20min.
It is the next step to remove entrance air by particular roller.
Various flooring materials can be applied on it after dry.
The product should be protected against frost and direct sun light
during transportation, storage and application. Application
temperature should not be lower than 5℃.
Safety and Health:
The product is environment-friendly product. It is doesn’t contain
formaldehyde, chloride or aromatic hydrocarbon and heavy metal such
as lead, mercury, cadmium at all. It is safe and nontoxic；therefore
it belongs to non-hazardous goods.